-
#13D Printed Lightweight Composite Foams: Material Development and Mechanical PerformanceAnalysis of 3D printed syntactic foam composites using hollow glass microballoons and HDPE, focusing on rheology, thermal expansion, and mechanical properties for lightweight applications.
-
#2Analysis of a 3D-Printed Terahertz Photonic Bandgap Waveguide Fluidic SensorTechnical analysis of a novel 3D-printed terahertz sensor using photonic bandgap waveguides for non-contact refractive index monitoring of flowing liquids.
-
#33D-EDM: Early Detection Model for 3D-Printer Faults - Technical AnalysisAnalysis of a lightweight CNN-based model for early fault detection in FDM 3D printers using image data, achieving over 96% accuracy.
-
#43D Printing Autoclavable PPE on Low-Cost Consumer 3D PrintersResearch on 3D printing temperature-resistant nylon copolymer for autoclavable PPE using low-cost consumer 3D printers with minimal modifications.
-
#53D Printing of Gas Jet Nozzles for Laser-Plasma Accelerators: A Comparative Study and Performance AnalysisAnalysis of using SLA, SLS, and FDM 3D printing for manufacturing tailored gas jet nozzles to control plasma density profiles in laser wakefield acceleration.
-
#63D Printing a Regular Octahedron: A Mathematical and Technical GuideA detailed guide on designing and 3D printing a regular octahedron using mathematical principles and OpenSCAD, covering geometry, transformations, and practical manufacturing considerations.
-
#73ddayinji - Technical Documentation and ResourcesComprehensive technical documentation and resources about 3ddayinji technology and applications.
-
#8A Framework for Adaptive Width Control of Dense Contour-Parallel Toolpaths in Fused Deposition ModelingAnalysis of a novel framework for generating adaptive-width toolpaths in FDM 3D printing to eliminate overfill/underfill, improve mechanical properties, and enable back pressure compensation.
-
#9Comparative Analysis of Additive Manufacturing Methods for Isotropic NdFeB MagnetsA detailed comparison of Stereolithography (SLA), Fused Filament Fabrication (FFF), and Selective Laser Sintering (SLS) for 3D printing isotropic NdFeB magnets, covering magnetic properties, process capabilities, and applications.
-
#10Additive Manufacturing for Advanced Quantum Technologies: A Comprehensive ReviewA review of additive manufacturing applications in quantum technologies, covering optics, optomechanics, magnetic components, vacuum systems, and future pathways.
-
#11Agentic LLM Systems for Accelerated Alloy Discovery in Additive ManufacturingAnalysis of a multi-agent LLM framework automating alloy discovery for additive manufacturing, integrating CALPHAD simulations, process modeling, and autonomous decision-making.
-
#123D Printing Autoclavable PPE on Low-Cost Consumer 3D PrintersA method for 3D printing temperature-resistant nylon copolymer on common low-cost 3D printers, enabling the production of autoclavable PPE without substantial material degradation.
-
#13Coercivity Enhancement of SLS NdFeB Magnets via Grain Boundary InfiltrationAnalysis of coercivity enhancement in additive-manufactured NdFeB magnets using selective laser sintering and grain boundary diffusion with low-melting alloys.
-
#14Vibration Compensation of Delta 3D Printer with Position-varying Dynamics using Filtered B-SplinesA novel methodology for efficient vibration suppression in delta 3D printers using filtered B-splines and real-time model approximation, achieving up to 23x computation speedup.
-
#15Development of a Novel Diffuse Reflector Filament for Additive Manufacturing of 3D-Printed Plastic ScintillatorsResearch on a white reflective filament for FDM 3D printing of finely segmented plastic scintillator detectors, enhancing light yield and reducing optical crosstalk.
-
#16Novel Diffuse Reflector Filament for 3D Printed Plastic ScintillatorsDevelopment and characterization of a white reflective filament for additive manufacturing of finely segmented plastic scintillators using FDM 3D printing technology.
-
#17From Digital Design to Physical Expression: Using 3D Printers and NAO Robots in Primary EducationAnalysis of a research project integrating NAO robots and 3D printers into primary school curricula to bridge digital design and physical creation, fostering digital literacy.
-
#18Fabrication Sequence Optimization for Minimizing Distortion in Multi-Axis Additive ManufacturingA computational framework for optimizing fabrication sequences in multi-axis AM to minimize thermal distortion, using a pseudo-time field encoding and gradient-based optimization.
-
#19FDM Printing for Fluidic Soft Circuits: A Democratization of Soft Robotic ControlExplores using desktop FDM 3D printing to fabricate soft bistable valves for fluidic logic, reducing fabrication time from 27 hours to 3 hours and lowering cost barriers.
-
#20Fully Resolved Numerical Simulations of Fused Deposition Modeling: Part I – Fluid Flow AnalysisA detailed analysis of a novel front-tracking/finite volume method for high-fidelity simulation of fluid flow and cooling in FDM/FFF 3D printing processes.
-
#21Numerical Optimization of Nozzle Shapes for Fused Deposition ModelingA comparative study on FDM nozzle shape optimization using viscous and viscoelastic flow models, featuring a flexible geometric parametrization framework.
-
#22Geometry Limitations in Indirect Selective Laser Sintering of AluminaAnalysis of geometric design constraints for alumina ceramic structures fabricated via indirect selective laser sintering, comparing polymer SLS rules with ceramic-specific limitations.
-
#23Geometry Limitations in Indirect Selective Laser Sintering of AluminaAnalysis of design constraints for ceramic open-channel architectures fabricated via indirect SLS, comparing polymer SLS rules and identifying ceramic-specific limitations.
-
#24Hatching for 3D Prints: Line-Based Halftoning for Dual Extrusion FDMA novel halftoning technique for FDM 3D printing that uses line-based hatching to create grayscale imagery without compromising print geometry or time.
-
#25Hybrid Inkjet-Stereolithography for High-Resolution Zirconia Additive ManufacturingAnalysis of UV-curable zirconia colloids for additive manufacturing via hybrid inkjet printing-stereolithography, focusing on ink formulation, printability, and sintering to high density.
-
#26From Logo to Object: A Mathematica-Based Pipeline for 3D Printing Sparse ImagesA technical paper detailing a method to convert 2D grayscale logos into 3D printable STL files using Mathematica, with application to the JDRF logo.
-
#27A Review of IoT Architecture, Technologies, and Smartphone-Based Attacks Against 3D PrintersAn analysis of IoT architecture, security challenges, and a novel smartphone-based side-channel attack methodology targeting 3D printing systems, including technical details and future directions.
-
#28Influence of Laser Power and Scanning Speed on Ti6Al4V Microhardness in Laser Metal DepositionAnalysis of how laser power and scanning speed affect microhardness in Laser Metal Deposited Ti6Al4V alloy using full factorial design of experiment.
-
#29ML-Assisted Pattern Recognition for UTS Estimation in FDM PLA SpecimensResearch on applying supervised ML algorithms (Logistic, Gradient Boosting, Decision Tree, KNN) to predict Ultimate Tensile Strength of FDM-printed PLA, with KNN showing superior performance.
-
#303D Non-Isothermal Phase-Field Modeling of Microstructure Evolution in Selective Laser SinteringAdvanced phase-field modeling of microstructure evolution during selective laser sintering, revealing process-microstructure relationships and enabling computational design optimization.
-
#31On-the-fly 3D Metrology for Volumetric Additive Manufacturing: Real-time Defect Detection and CorrectionAnalysis of a breakthrough method enabling simultaneous 3D printing and quantitative shape measurement during tomographic volumetric additive manufacturing, achieving sub-1% accuracy.
-
#32PLA-cHAP Composite Fabrication and Surface Structuring via Direct Laser WritingResearch on the synthesis of polylactic acid-carbonated hydroxyapatite composite, its surface microstructuring using DLW, and analysis of material properties.
-
#33Mechanical and Thermal Enhancement of PLA Composites with Aligned Few-Layer GrapheneAnalysis of PLA composite films with aligned few-layer graphene, focusing on mechanical property improvements, dispersion effects, and thermal/electrical conductivity.
-
#34Tailored Thermal and Mechanical Performance of Biodegradable PLA-P(VDF-TrFE) Polymer BlendsAnalysis of structure-property relationships in PLA-P(VDF-TrFE) blend films, focusing on thermal, mechanical, and electroactive properties for functional applications.
-
#35Analysis of Crystallization Behavior in Porous PLA Scaffolds via Modified Solvent CastingA technical analysis of a modified solvent casting/particulate leaching method for controlling crystallinity in porous PLA tissue engineering scaffolds, including methodology, results, and implications.
-
#36Projection Micro Stereolithography (PµSL): High-Resolution 3D Printing Technology and ApplicationsA comprehensive review of Projection Micro Stereolithography (PµSL) technology, its working principles, multiscale/multimaterial capabilities, and applications in metamaterials, optics, 4D printing, and biomedicine.
-
#37Advanced Manufacturing Configuration via Sample-Efficient Batch Bayesian OptimizationA framework for configuring expensive-to-evaluate advanced manufacturing processes using a novel, aggressive Bayesian Optimization acquisition function and parallelized, status-aware procedures.
-
#38Singularity-Aware Motion Planning for Multi-Axis Additive ManufacturingA technical analysis of motion planning methods addressing singularity and collision issues in multi-axis 3D printing to improve fabrication quality.
-
#39Stereolithographically Fabricated Polymethacrylate Broadband THz Absorber: Design, Fabrication, and PerformanceAnalysis of a research paper on a broadband THz absorber fabricated using stereolithography, covering design, experimental results, and implications for additive manufacturing in optics.
-
#40Structural Multiscale Topology Optimization with Stress Constraint for Additive ManufacturingPhase-field approach for structural topology optimization in 3D printing with stress constraints, multiple materials, and multiscale analysis. Includes rigorous optimality conditions and experimental validation.
-
#41SurfCuit: Surface Mounted Circuits on 3D PrintsSurfCuit enables design and fabrication of durable electric circuits on 3D printed surfaces using copper tape and soldering techniques, eliminating complex casing design.
-
#42Sustainability in Additive Manufacturing: A Comprehensive AnalysisAn in-depth exploration of additive manufacturing's role in sustainable production, covering technologies, environmental benefits, challenges, and future directions.
-
#43Swarm Fabrication: Reconfigurable 3D Printers and Drawing Plotters Made of Swarm RobotsResearch on creating on-demand, scalable fabrication machines using swarm robots. Demonstrates construction of X-Y-Z plotters and 3D printers with toio robots and 3D printed attachments.
-
#44Toolpath Design for Additive Manufacturing Using Deep Reinforcement LearningA research paper proposing a reinforcement learning platform to dynamically learn optimal toolpath strategies for metal-based additive manufacturing, overcoming high-dimensional design space challenges.
Last updated: 2026-01-15 12:31:34